Sunday, February 20, 2011

Shift/Jump unit control board in progress

I've started working on the shift/jump unit control board.  Today I implemented the MODSEL/!MODSEL logic and the LR selectors.  For reference, here's the schematic:


Back side of board -- point-to-point wiring being used in this case.

Front of the board -- the sharpie labels will get replaced with proper printed ones when finished.
Posted by at

1 comment:

  1. KevinMay 5, 2011 at 11:49 PM

    Hi Paul, I've been enjoying following your progress. Hope all is well on your end! Looking forward to hearing more about the project. Best- Kevin

    ReplyDelete

Note: Only a member of this blog may post a comment.

Subscribe to: Post Comments (Atom)